Jalan Medan Putra 6, Medan Putra Bussiness Centre, 52200 Kuala Lumpur, Wilayah Persekutuan Kuala Lumpur Open Monday–Sunday · 7:00 AM – 9:00 PM
Home  /  Services  /  Installation

Aircond Installation Kuala Lumpur

New aircond installation for KL homes, renovations, and commercial fit-outs. Wall-mounted split, cassette, or ceiling-concealed — with full piping, drainage, and electrical hookup included.

Split unit aircond installation in Kuala Lumpur — wall-mounted indoor unit being mounted
Quick Answer · TL;DR

Aircond installation in KL — at a glance

What It Is

Aircond installation in Kuala Lumpur explained

Aircond installation in Kuala Lumpur covers the job from assessing the site through to the unit running. We install wall-mounted split, ceiling cassette and ceiling-concealed systems for new homes, renovations and commercial fit-outs. What is involved varies with the property — where the outdoor unit can sit, how the pipe run and drainage need to be routed, and the electrical supply — so each installation is quoted after we understand the site.

Three Install Types

Types of split unit installation we provide

Most KL homes go with wall-mounted splits. Cassette and ceiling-concealed are common in commercial fit-outs and high-end residential.

Wall-Mounted Split

Most Popular

Standard residential install. Indoor unit on the wall, outdoor condenser on a balcony or AC ledge. Sizes 1.0HP to 2.5HP+ for bedrooms and living areas.

Ceiling Cassette

Commercial Standard

Four-way flow ceiling unit. Common in cafes, retail stores, and offices. Cools evenly across an open floor plan without a wall-visible indoor unit.

Ceiling-Concealed

Premium Fit-Out

Fully hidden indoor unit inside the false ceiling, with grille outlets. Used in renovated condos and offices where no indoor unit should be visible.

What’s Included

What’s included in aircond installation

Every quote we send covers the full scope below. Anything beyond standard (longer piping, false ceiling work) is added line-by-line — never tacked on after.

3m copper piping

OEM-grade insulated copper piping between indoor and outdoor units. Longer pipe runs are quoted separately.

Wall bracket

Heavy-duty galvanised bracket for outdoor unit, anchored with M8 expansion bolts.

Drainage line

PVC drainage from indoor unit to nearest drain point, fall angle tested for water flow.

Electrical hookup

From the nearest 13A power point or sub-board.

Vacuum-down & gas

Refrigerant line evacuated to negative pressure, then charged with the OEM-spec R32 or R410A.

Cold-air test & cleanup

Outlet temperature measured, full waste removal from the property, photo evidence on WhatsApp.

Residential & Commercial

Installation for KL homes and businesses

Residential

Apartments, condos, and landed homes. New-build, renovation, or replacing an old unit. Usually 1.0–2.5HP wall-mounted splits, scheduled around your move-in or renovation timeline.

Commercial

F&B fit-outs, retail shops, offices, clinics. Mostly ceiling cassettes or concealed systems sized to floor area and occupant load. We coordinate with your interior contractor on routing and ceiling access.

Booking Process

Our 5-step installation process

Step 1 · Message us

WhatsApp us the room photo

Send a photo of the room and the wall where the indoor unit will mount. Tell us the brand and HP you want (or ask us to recommend).

Step 2 · Message us

Written quote on WhatsApp

Quote covers the unit (if we’re supplying), labour, copper piping, electrical work, and any extras like longer piping or false-ceiling access.

Step 3 · Same week

Site visit & schedule

Quick pre-install visit if needed (for cassette or concealed installs) to confirm ceiling access and drainage routing. Wall-split jobs typically skip this.

Step 4 · On site

Installation

Mount bracket, run copper piping, drainage, and electrical. Vacuum down, gas charge, cold-air test. Photo evidence at each stage on WhatsApp.

Step 5 · Aftercare

First service reminder

Auto-reminder 6 months later for first service.

Frequently Asked

Aircond installation FAQ

What’s included in an aircond installation?

Full installation includes site assessment, 3 metres of copper piping, wall bracket, drainage line, electrical hookup to the nearest power point, vacuum-down of the line set, gas charge, cold-air test, and waste removal. Beyond 3m of piping is quoted per metre. New units come with whatever cover the manufacturer provides — we hand you the paperwork on completion.

How long does an aircond installation take?

Timing depends on the unit type and on ceiling access and drainage routing for cassette and ceiling-concealed installs. Multi-unit installations are scheduled with two technicians so the work runs in parallel.

Do you install all aircond brands?

Yes — we install all major brands sold in Malaysia: Daikin, Panasonic, Mitsubishi Electric, Mitsubishi Heavy Industries, York, Hitachi, Sharp, Samsung, LG, Acson, Carrier, and Midea.

What happens if something is wrong after installation?

Tell us and we will come back and look at it. New units come with whatever cover the manufacturer provides for that model — we hand you the paperwork on completion.

Gallery

Our aircond work across Kuala Lumpur

A look at recent residential and commercial jobs handled by our in-house team in KL.

Ready to install? Get a quote on WhatsApp.

Send a photo of the room and the wall where the indoor unit will mount. We reply with a full written quote.

Get a Free Quote on WhatsApp